Led And Sound Indication - Philips SHB1400/00 Quick Start Manual

Please refer to www.philips.com/welcome for full user manual.
Using your headset
Turn headset on/off
Check battery
Pick up/ end a call
Adjust volume
Redial the last number
Reject a call
Activate voice dialing
Transfer call to mobile phone
Mute the Mic
*Available if supported by your mobile phone.

LED and sound indication

The red/blue LED fl ashes alternately.
The blue LED fl ashes once every 3
seconds.
The red LED fl ashes twice every 5
seconds.
The blue LED fl ashes once every half a
second.
The blue LED fl ashes once every second. The headset is active on a call.
The red LED fl ashes three times and
beeps twice every minute.
Solid red LED
The LED is off.
The headset beeps every 5 seconds
Welcome to Philips!
For an optional experience, register your product at
www.philips.com/welcome
© 2011 Koninklijke Philips Electronics N.V. All rights reserved.
Trademarks are the property of Koninklijke Philips
Electronics N.V. or their respective owners.
V2.0
Press until LED turns on/off.
Hold VOL + and VOL - simultaneously.
> 50%: 1 blue fl ash
< 50%: 2 red fl ashes
< 25%: 3 red fl ashes
Press .
Press VOL +/ VOL -.
Press twice quickly.
Hold .
Hold until beep occurs.
Hold while on a call.
Press twice quickly during a call.
The headset is ready for pairing.
The headset is connected to the phone.
The headset is not connected.
There is an incoming/outgoing call.
The battery is low in power.
The headset is charging.
The headset is off./Charging is fi nished.
The Mic is muted.