Philips SHB1400/00 Quick Start Manual

Quick start guide
Philips Bluetooth stereo headset SHB1400

Charge your headset

1
Remove the USB cap.
2
Plug the headset into a powered USB
port for charging. Red LED will turn
off after the headset is fully charged.
Make sure to '' pair '' your new Philips headset with your cell phone before
you use it for the first time
1
Ensure that the headset is charged and
turned off.
2
Ensure that the mobile phone is
turned on and its Bluetooth feature is
activated.
3
Press until the LED starts fl ashing
red and blue alternately. Do not stop
pressing the button after seeing the
blue LED only.
4
Pair the headset with the mobile
phone. For details, refer to the user
manual of the mobile phone.
Fit your headset
Place the earbud in your ear, and
rotate the headset upwards or
downwards until it fi ts securely.
Settings Connectivity
Bluetooth
Add
Bluetooth
device
Select
Back
Optional
For an extra-secure fi t, attach
the earhook: Push the ball joint
between the earbud and the main
body of the headset. Adjust the
earhook for providing the best fi t.
Settings
Devices Found
Philips SHB1400
Select
Back
''0000''
not required for
some mobile phones.
EN
Settings Connectivity
Enter Password
Select
Back