Specifications; Power Input Sources And Options; Certifications - Honeywell MIWI350 Installation And Operation Manual

1 About MIWI350
PD Board
SLA
UMB

1.4 Specifications

1.4.1 Power Input Sources and Options

Source/Battery
Configuration
Dual pack with
Alkaline
Supercap
Quad pack with
Alkaline
Supercap
Backup Battery
Alkaline
Solar with SLA
Solar Panel
Battery

1.4.2 Certifications

Metrology
Measurement Canada (approval pending)
Haz Loc Certifications
CSA C/US Class I, Division 2, Groups C and D, T3C
IECEx Class I, Zone 2 Group IIB (approval pending)
Wireless Certification (IC & FCC)
Max RF POWER of the Modem
CLR100: 25dBm/316mW
CLR110: 23dBm/200mW
RV50 Modem: 32dBm/1.6W
Industry Canada: IC ICES-003
FCC: Part 15 B Class-A Digital device
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and;
2. This device must accept any interference received, including interference that may cause undesired
operation.
Power Distribution Board
Sealed Lead Acid
Universal Mounting Bracket
Voltage Battery
Type (VDC) Backup
18
18
6 Yes
14.5 Yes
Backup Battery
Type
Voltage (VDC)
Alkaline 6
Lead-Acid 12
Ampere
Battery Power
Hours
usage
(Ah)
EVC & MODEM
EVC & MODEM
EVC Only as
backup
7/21 EVC & MODEM
Honeywell
| 2