Graco A Series Instructions-Parts List Manual page 24

FILTER (AIR OR PAINT) 202–271
750 psi (52 bar) MAXIMUM WORKING PRESSURE
With 60 mesh (250 micron) element,
3/8 npt(f) inlet, 3/8 npt(m) outlet
HIGH VOLUME AIR REGULATOR 206–199
0–125 psi (0–9 bar) Regulated Pressure
200 psi (14 bar) Steel Pressure Gauge
1/2 npt(f) inlet and outlet
AIR FILTER & MOISTURE SEPARATOR 106–148
250 psi (17.5 bar) MAXIMUM WORKING PRESSURE
For cleaning and drying air in air spray system.
20 micron element, 5 oz. bowl capacity,
3/8 npt(f) inlet and outlet
NYLON AIR HOSE ASSEMBLIES
225 psi (15.75 bar) MAXIMUM WORKING PRESSURE
0.25 in. (6.35 mm) ID, 1/4 npsm(fbe)
215–630 25 ft (8 m)
215–631 50 ft (15 m)
215–632 75 ft (23 m)
215–633 100 ft (30 m)
215–634 150 ft (46 m)
ACCESSORIES
Accessories must be purchased separately.
Use only GENUINE GRACO PARTS AND ACCESSORIES.
BUNA–N AIR HOSE ASSEMBLIES
180 psi (13 bar) MAXIMUM WORKING PRESSURE
0.25 in. (6.35 mm) ID, 1/4 npsm(fbe)
216–069 25 ft (8 m)
216–070 50 ft (15 m)
216–071 75 ft (23 m)
216–072 100 ft (30 m)
216–073 150 ft (46 m)
NYLON FLUID HOSE ASSEMBLIES
225 psi (15.75 bar) MAXIMUM WORKING PRESSURE
0.25 in. (6.35 mm) ID, 3/8 npsm(fbe)
215–637 25 ft (8 m)
215–638 50 ft (15 m)
NYLON FLUID HOSE ASSEMBLIES
500 psi (35 bar) MAXIMUM WORKING PRESSURE
0.25 in. (6.35 mm) ID, 3/8 npsm(fbe)
216–076 25 ft (8 m)
216–077 50 ft (15 m)
216–078 75 ft (23 m)
216–079 100 ft (30 m)
216–080 150 ft (46 m)
75 KV METALLIC POWER SUPPLY 221–180
For use with Electrostatic Metallic Air Spray Gun. Not for
use in Hazardous areas.
HIGH VOLTAGE CABLES FOR 75 KV
POWER SUPPLY
217–306 25 ft (8 m)
217–307 50 ft (15 m)
217–308 75 ft (23 m)
217–309 100 ft (30 m)
217–310 150 ft (46 m)
GUN, POWER SUPPLY AND HOSE KITS
Each kit contains: Air Spray Gun 221–179, 75 KV
Power Supply 221–180, and a length of buna–N Air
Hose with fittings. The air hose lengths vary by part
number, as indicated below.
222–425 25 ft (8 m)
222–426 50 ft (15 m)
222–427 75 ft (23 m)
222–428 100 ft (30 m)
222–429 150 ft (46 m)