English HEAVY-DUTY CORDLESS SDS MAX COMBINATION HAMMER DCH733, DCH773 Congratulations! This may significantly reduce the exposure level over the total working period. You have chosen a D WALT tool. Years of experience, thorough Identify additional safety measures to protect the operator product development and innovation make D WALT one of the from the effects of vibration such as: maintain the tool most reliable partners for professional power tool users.
*Date code 201811475B or later **Date code 201536 or later English Batteries Chargers/Charge Times (Minutes) Weight (kg) DCB104 DCB107 DCB112 DCB113 DCB115 DCB118 DCB132 DCB119 Cat # DCB546 18/54 6.0/2.0 1.05 DCB547 18/54 9.0/3.0 1.46 135* 135* DCB548 18/54 12.0/4.0 1.44 DCB181 0.35...
Page 7
English from moving parts. Loose clothes, jewellery or long hair contacts eyes, additionally seek medical help. Liquid can be caught in moving parts. ejected from the battery may cause irritation or burns. g ) If devices are provided for the connection of dust 6) Service extraction and collection facilities, ensure these are a ) Have your power tool serviced by a qualified repair...
English Slightly worn chisels can be resharpened by grinding. Important Safety Instructions for All • Battery Chargers • Do not overheat the bit (discoloration) while grinding a new edge. Badly worn chisels require reforging. Do not SAVE THESE INSTRUCTIONS: This manual contains important reharden and temper the chisel.
English A cold battery pack will charge at a slower rate than a warm reassembly may result in a risk of electric shock, electrocution or fire. battery pack. The battery pack will charge at that slower rate throughout the entire charging cycle and will not return to •...
English The International Carriage of Dangerous Goods by Road (ADR). • Charge the battery packs only in D WALT chargers. Lithium-ion cells and batteries have been tested to section 38.3 • DO NOT splash or immerse in water or other liquids. of the UN Recommendations on the Transport of Dangerous •...
English Package Contents 2. For long storage, it is recommended to store a fully charged battery pack in a cool, dry place out of the charger for The package contains: optimal results. 1 Rotary Hammer nOTE: Battery packs should not be stored completely 1 Side handle depleted of charge.
English Intended Use the speed and impact energy. Dial settings make the tool extremely flexible and adaptable for many different appli cations. Your rotary hammer has been designed for professional The required setting depends on the bit size and hardness of rotary masonry and concrete drilling, chiseling and material being drilled or chiselled.
English Mounting the Straight Side Handle (Fig. C) ASSEMBLY AND ADJUSTMENTS 1. Widen the ring opening of the side handle 2 by rotating it WARNING: To reduce the risk of serious personal anti-clockwise. injury, turn tool off and disconnect battery pack 2.
English Operation Modes (Fig. A) Drilling with a Core Bit (Fig. A) 1. Insert the appropriate core bit. WARNING: Do not select the operating mode when the 2. Assemble the centerdrill into the core bit. tool is running. 3. Set the mode selector switch 4 ...
English WARNING: To reduce the risk of serious personal • Li-Ion cells are recyclable. Take them to your dealer or a injury, turn tool off and disconnect battery pack local recycling station. The collected battery packs will be before making any adjustments or removing/ recycled or disposed of properly.
Page 16
Belgique et WALT - Belgium BVBA Tel: NL 32 15 47 37 63 www.dewalt.be Luxembourg België en Luxemburg Egide Walschaertsstraat 16 Tel: FR 32 15 47 37 64 enduser.BE@SBDinc.com 2800 Mechelen Fax: 32 15 47 37 99 Danmark WALT (Stanley Black&Decker AS)