Connecting To A Computer (Vga) - Philips PPX1430/EU User Manual

Picopix pocket projector
Hide thumbs Also See for PPX1430/EU:
Table of Contents

Advertisement

Connecting to mobile multimedia devices
Connecting to mobile multimedia devices
Some video devices (e.g.: pocket multimedia players, ...)
require specific connection cables. There are either
supplied with the device or acquired from the manufac-
turer of the multimedia device. Please note that only the
original cables from the device manufacturer may func-
tion.
Componet Mobile Device
Signal output, multimedia devices
Notice
Switching to the multimedia device sig-
nal output
See the multimedia device instruction manual
to find out how to switch the signal output to
this jack.
Connect to the playback device
Connecting to a Computer
(VGA)
Use the VGA audio cable (accessory) to connect the
projector to a computer, laptop or some PDAs. The
projector supports the following resolutions: VGA/
SVGA/XGA . For best results, set the computer's reso-
lution to SVGA (800x600).
Laptop VGA
1 Connect the VGA audio cable to the VGA / YPbPr
socket of the projector.
2 Connect the VGA plug to the computer's VGA
socket and the audio plug to the computer's audio
output.
3 Adjust the computer's resolution to the correct set-
ting and switch the VGA signal to an external moni-
tor.
4 The following resolutions are supported:
Resolution
VGA
640 x 480
SVGA
800 x 600
XGA
1024 x 768
Image
refresh rate
60 Hz
60 Hz
60 Hz
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Picopix ppx 1430

Table of Contents