Load Recipe Screen - Graco Compact Twin Flow Manual

LOAD RECIPE screen

The purpose of this screen is to allow the reading of machine configurations as "Recipes" from memory.
To load a recipe do the following:
(If you are at the Recipe Preview screen press the LOAD RECIPE button to get to the screen shown above)
1. Select a recipe by touching the recipe loaded on the touch screen, the recipe that you touch will have a
yellow rectangle around the recipe.
2. Verify that the recipe that you selected is in the RECIPE LOAD MESSAGE WINDOW in the top of the
LOAD RECIPE screen.
3. To load the selected recipe, press the ACCEPT button.
4. The RECIPE PREVIEW screen should appear with the new recipe loaded.
NOTE: To escape the LOAD RECIPE screen press the CANCEL button.
NOTE: If you have recently loaded or edited a new recipe the machine will not operate in this
configuration until you press the SEND RECIPE TO CONTROLLER button from the RECIPE
PREVIEW screen.
\
20