Radio Operations - JVC KW-S601 Instructions Manual

Setting the clock
1
2
Setting the hour and minute.
To adjust the
hour
To adjust the
minute
To use these buttons for their original
functions again, wait for 15 seconds without
pressing any of these buttons or press CLOCK
again.
To check the current clock time while
listening to a source

Radio operations

~
or
Lights up when receiving an FM stereo broadcast with
sufficient signal strength.
Ÿ
Start searching for a station.
6
Current display Ô
Clock
Selected band appears.
When a station is received, searching
stops.
To stop searching, press the same button
again.
To tune in to a station manually
In step Ÿ ...
1
2 Select a desired station frequency.
When an FM stereo broadcast is hard to
receive
Lights up when monaural mode is activated.
Reception improves, but stereo effect will be
lost.
To restore the stereo effect, repeat the same
procedure. "MONO OFF" appears and the MO
indicator goes off.
Storing stations in memory
You can preset six stations for each band.
FM station automatic presetting —
SSM (Strong-station Sequential
Memory)
1
Select the FM band (FM1 – FM3) you
want to store into.