Operation; Maintenance - Metabo Sr 356 Instructions For Use Manual

Sr 356 / 358 18.12.2007
ENGLISH
FUNCTIONAL DESCRIPTION
1/3 Sheet Orbital
Finishing Sander
Sr 356
Specifications
Sanding pad size
Sheet size
Orbits per minute
Orbit size
Amperage
Voltage
Frequence
Net weight
Length
This orbital sander complies with applicable
OSHA Standards.
Standard Equipment
Front handle
Paper dust bag
Optional Equipment
Canvas dust bag
Bayonet connection
for attachment to 1 1/2" vacuum hose
1/2 Sheet Orbital
Finishing Sander
Sr 358
Specifications
Sanding pad size
Sheet size
Orbits per minute
Orbit size
Amperage
Voltage
Frequence
Net weight
Length
This orbital sander complies with applicable
OSHA Standards.
Standard Equipment
Front handle
Paper dust bag
Optional Equipment
Canvas dust bag
Bayonet connection
for attachment to 1 1/2" vacuum hose
4
11:15 Uhr Seite 4
5
3 ⁄ " x 7 ⁄ "
5 1
8 8
1/3 sheet
11,000 (opm)
1 Front Handle
1/10"
2 Dust Bag
3.4 A
3 Switch
120V~ AC
60 Hz

OPERATION

6.5 lbs.
11 1/4"
Switching on
The SR 358 is switched on by depressing the
switch (3). The tool is equipped with a lock on
button (4). While depressing the trigger switch
fully, push lock button to activate the lock on fea-
31.602.520
ture. .Depressing switch again de-activates the
31.288
lock on.
Caution: To avoid unintentional startup always
31.235
turn off switch when plug is removed from
30.898
socket, or in the event of a power interruption.
Mounting the sandpaper
Raise the clamp (5) lever and slide sanding
paper into position. Tension paper by lowering
clamp (5) lever.
Fitting the dust collector (2)
Slide into vacuum nozzle and twist clockwise to
lock into position.
Fitting front handle (1)
The front handle can be mounted in either an
4 1 ⁄ " x 8 7 ⁄ "
2 8
upper or lower position for user comfort.
1/2 sheet
11,000 (opm)

MAINTENANCE

1/10"
Your sander should be given proper routine
3.4 A
maintenance to ensure proper performance and
120V~ AC
long life. Periodic blowing out using compressed
60 Hz
air keeps dust from settling inside motor.
6.75 lbs.
Maintenance should be performed by qualified
11 1/4"
personnel or authorized Metabo service center.
Warning: Before performing any maintenance,
disconnect tool from power source.
31.602.520
CARBON BRUSHES
31.288
This tool is equipped with auto-stop brushes.
When the brushes are worn down, the tool will
31.235
stop running. At this time we recommend having
30.898
the tool professionally serviced for brush repla-
cement, cleaning, and inspection.
4
1
3
4 Switch Lock
5 Clamp Lever
2