Viewing Set-Top Box Information; Restoring The Factory Settings - Philips UPC Direct DSR4101/58 User Manual

DSR 4101_02/2005.qxd

Viewing set-top box information

You can view technical information about your set-top box.
To display this information:
1. On the Setup menu, highlight 'Decoder information', and
then press OK.
2. To redisplay the Setup menu, press BACK.

Restoring the factory settings

If you wish, you can restore all your set-top box's factory-preset
settings.
Note: If you restore your set-top box's factory settings, you will need to redo
the country selection and search for channels - see page 18 to 20.
The items that are restored, and what they will be restored to, are
shown below.
Setting
Menu/banner language
Audio language
Subtitle language
Volume level
TV format
TV output signal
To restore the factory settings:
1. On the Setup menu, highlight 'Restore factory settings', and
then press OK.
2. A message displays asking you to confirm you want to restore
the factory settings. If you are sure you want to do this, press
OK. If you do not want to restore the factory settings, press
BACK.
The message 'Default settings restored' displays.
3. Press OK. The set-top box displays the Welcome screen.
4. Select the country and search for channels as described on
page 18 to 20.
4/02/05 8:13 Page 39
Factory setting
English
English
English
MAX
4/3
RGB
SETUP 39