2. Setting up the monitor
2. Setting up the monitor
2.1 Installation
Package contents
DVI (optional)
Install base stand
1. Place the monitor face down on soft and
smooth surface taking care to avoid scratching
or damaging the screen.
Register your product and get support at
www.philips.com/welcome
241B4LP
Quick
Start
Philips and the Philips' Shield Emblem are registered trademarks of
Koninklijke Philips Electronics N.V. and are used under license from
Koninklijke Philips Electronics N.V.
VGA (optional)
2. Snap in the base in the VESA mount area.
3. Hold the monitor base stand with both hands
and firmly insert the base stand into the base
column.
(1) Gently attach the base to the base column
until the latch locks the base.
(2) Use your fingers to tighten the screw
located at the bottom of the base, and
secure the base to the column tightly.
4