Assembling The Unit; Adjusting The Throttle Cable - Stihl BT 131 Instruction Manual

English

Assembling the Unit

Fitting activating lever for auger brake
3
1 2
3
Insert the activating lever (1) into
N
the clamp
Place the holder (2) onto the
N
activating lever
Screw in the fastening screws (3)
N
and tighten
12
Fit the padding
3
Hook the padding (1) with the
N
tabs (2) into the oblong holes in the
handle frame
Fold up the padding
N
Secure the padding to the
N
handlebar with the cling strips (3) –
do not jam the throttle cable

Adjusting the Throttle Cable

It may be necessary to correct the
adjustment of the throttle cable after
assembling the machine or after a
prolonged period of operation.
Adjust the throttle cable only when the
machine is completely and properly
assembled.
Set the throttle trigger to the full
N
throttle position.
Rotate the screw in the throttle
N
trigger clockwise until you feel initial
resistance. Then rotate it another
half turn in the same direction.
3
BT 131