Recharging The Battery - Philips DMVC300K/00 Instructions For Use Manual

Recharging the battery

1 Make sure the camera is turned off.
2 Turn on the PC.
3 Connect the USB plug of the USB/Microphone cable to the USB port of the PC.
4 Place the camera's USB connector on the USB connector in the desktop stand. Push it down
gently until it clicks into position.
> You will hear a beeping sound, the display lights up blue and the Charge LED lights up red.
The battery will now be recharged.
> It will take four hours to fully recharge the battery. When the battery is fully recharged the
Charge LED will go out.
Notes!
– Charge the camera in time! When the battery is empty all photos in the camera memory will be lost..
– When the battery is almost empty, the camera starts beeping and
ENGLISH
appears on the display.
17