Table of Contents
Advertisement
You may lose all your personal settings if you remove
the battery when the phone is switched on.
1.
Once the battery and battery cover are clipped
on the phone, plug the connector of the charger
(supplied with the phone, in the box) into the
socket at bottom of the phone on one end, then
plug it into a main AC power socket with easy
access on the other end.
Getting started
2.
The battery symbol indicates the state of charge:
- during charging, the 4 charge indicators scroll;
each bar represents around 25% of charge and
it takes around 2 hours to fully recharge your
mobile phone.
- when all 4 bars are steady the battery is fully
charged: disconnect the charger. Depending
on the network and condition of use, talk time
goes from 2 to 4 hrs and stand-by time from
200 to 400 hrs.
Keeping the charger plugged to the mobile when the
battery is fully charged doesn't damage the battery.
The only way to turn off the charger is to unplug it, so
use an easily accessible AC power socket. You can
connect the charger to an IT supply (Belgium only).
3
Advertisement
Table of Contents
