Table of Contents
Advertisement
5.
Replace the battery cover by sliding it into its
slot, until it stops. Remove the protective film
covering the screen before using the phone.
Switch on the phone
1.
To switch on the phone, press the
2.
Enter the PIN code if required (i.e. the 4 to 8-
digit secret code of your SIM card). It is
preconfigured and communicated to you by
your operator or retailer. To personalise the PIN
code, see page 20. Press
c
(press
if you make a mistake).
If you enter a wrong PIN code 3 times, your SIM card
is blocked. To unblock it, you must request the PUK
code from your operator.
2
)
key.
,
#
or
to confirm
Set date and time
As prompted by the phone at first switch on, set the
date by pressing the appropriate numeric keys (press
c
to erase a number), then set the time.
For complete date and time options, see page 22.
Copy the SIM phonebook
If at first switch on you do not copy the SIM
phonebook, see "Copy to phone" page 12.
The mobile phone detects a SIM card that already
contains names, and a message asks you if you want to
copy your SIM phonebook onto the built-in
c
phonebook. Press
The default phonebook, either in SIM or in phone, is
operator-dependent. For details on how to set the
default phonebook, see "Contacts select" page 12.
Charge the battery
Your phone is powered by a rechargeable battery. A
new battery is partially charged and an alarm will warn
you when the battery reaches low. If the battery is
completely flat, it will take 2 or 3 minutes of charging
for its icon to reappear.
,
to cancel or
to accept.
Getting started
Advertisement
Table of Contents
