Table of Contents
Advertisement
12.7
Set the Backlight Time
(Handset only)
You can change the backlight timing for
the display. There are 3 options available
- 20, 40, or 60 seconds.
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Backlight Time and
press o Select.
Scroll n to the desired backlight
time, and press o Select to
confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
12.8
Deactivate/Activate Auto
Hang-Up (Handset only)
If auto hang-up is set to On, it will
automatically release the line when the
phone is put back on the cradle.
If auto Hang-up is set to Off, putting the
handset back on the cradle while in talk
mode will switch the handset to hands
free talk mode. This allows you to charge
the handset during calls.
The default setting for auto hang up is On.
Press m in idle mode, scroll n to
Personal Set, and press o
Select.
Scroll n to Auto Hang-up and
press o Select.
Scroll n to On or Off and press o
Select to confirm.
• A validation tone is emitted and
the screen returns to the
Personal Set menu.
Personal settings
12.9
Changing the Line Setting
(Base Station only)
Note
See section 13.14 for how to change the
line setting from the handset.
If you have two telephone lines
connected to the base unit, the line
setting determines how the lines are
selected when making or receiving calls.
When "auto" is selected as the line
setting, pressing l automatically
connects the line that is currently free
when making outgoing calls, or the line
that is ringing when receiving an
incoming call. (If both lines are in the
same state, line 1 takes priority.) If Auto
Conference is activated, pressing l
lets the base station join a conversation
between the external call on line 1 and
another unit.
If Line 1 or Line 2 is selected as default
and the corresponding line is free,
pressing l automatically connects to
that line when making outgoing calls, or
when receiving an incoming call on that
line. If Auto Conferenece is activated,
pressing l lets the base station join a
conversation on the selected line
between an external caller and another
unit.
Press m in idle mode, scroll u/d
to Personal Set and press Select
soft key.
Scroll u/d to Line Setting and
press Select soft key.
Scroll u/d to select Auto, Line
1, or Line 2 and press Select soft
key.
51
Advertisement
Table of Contents
