Using Your Heated Throw - Sunbeam TR6300 Instruction Booklet

Using your heated throw

Using your heated throw
Your heated throw can be used on the lounge
or in your favourite chair, providing cosy
comfort wherever you need it. It can even
be used on futons, adjustable beds and
waterbeds.
Connecting the control
With the control set to the off position, insert
the control connector into the socket, making
sure it is firmly clicked into position. Plug
the control into a 230-240V power outlet and
turn the power on.
Note: ensure that the control is connected to
the heated throw before inserting the plug
into the power outlet. Connecting the power
before attaching the control to the throw
rug will replicate a power interruption and
activate the safety system, preventing the
throw from heating.
Caution: keep the control away from heating
sources such as heaters and lamps. Do not
cover the control.
Using your heated throw
Your heated throw is supplied with a 6 heat
control. The settings on the temperature dial
are recommended for use as follows:
1 – 2 Low, gentle heat for all night use
3 – 4 Medium heat
5 – 6 High heat, for preheating only
Use the high heat settings to preheat the
throw only. Do not use your heated throw on
these settings for more than 30 minutes.
5