Samsung SH24TAB5 Service Manual page 12

Operating Instructions and Installation
3-1-1 Name & Function of Key in remote controller
1. AUTO MODE : In this mode, operation
mode(COOL) is selected automatically by
the room temperature of initial operation.
Room Temp
Tr³ 21¡C+ÆT Cool Operation (Set Temp:AUTO SETTING)
ÆT= -1¡C, -2¡C, 0¡C+1¡C+2¡C
ÆT is controlled by setting temperature
up/down key of remote controller
2. COOL MODE : The unit operates according
to the difference between the setting and
room temperature. (18¡C~30¡C)
3. DRY MODE : Has 3 states, each determined
by room temperature.
The unit operates in DRY mode.
*Compressor ON/OFF Time is controlled
compulsorily(can not set up the fan speed,
always breeze).
*Protective function : Low temperature
release. (Prevention against freeze)
4. TURBO MODE : This mode is available in
AUTO, COOL, DRY, FAN MODE.
When this button is pressed at first, the air
conditioner is operated ÒpowerfulÓ state for
30 minutes regardless of the set tempera-
ture, room temperature.
When this button is pressed again, or when
the operating time is 30 minutes, turbo
operation mode is canceled and returned to
the previous mode.
*But, if you press the TURBO button in DRY
or FAN mode that is changed with AUTO
mode automatically.
3-2
Operation Type
5. SLEEP MODE : Sleep mode is available
only in COOL mode.
The operation will stop after 6 hours.
*In COOL mode : The setting temperature
is automatically raised by 1¡C each 1hour
When the temperature has been raised by
total of 2¡C, that temperature is main-
tained.
6. FAN SPEED : Manual (3 step), Auto (4 step)
Fan speed automatically varies depending
on both the difference between setting and
the room temperature.
Samsung Electronics