Avaya Wlan 8100 System Configuration Options; Configuration Requirements; Wlan Network Design - Avaya WLAN 8100 Quick Start Manual

Hide thumbs Also See for WLAN 8100:

Table of Contents

Introduction

Avaya WLAN 8100 system configuration options

You can use one of the following tools to configure the WLAN 8100:

• command line interface (CLI)

• WLAN Management System 8100 (WMS) software

• Enterprise Device Manger (EDM)

You must use the CLI to complete the preliminary configuration to connect the Wireless

Controller (WC) 8180 to the network. After you have configured the WC 8180 to connect to

the network, you can use the CLI, WMS, or EDM to configure wireless services.

The following components are required to achieve the configuration described in this

document:

• Wirelesss Controller (WC) 8180

• Access Point (AP) 8120 and 8120 with External Antenna

• Power over Ethernet PoE) switch or power injector for AP

• DHCP server

• wireless client

• WLAN Management System (WMS) software server (optional)

• wired client (optional , for WMS or EDM use)

This guide provides procedures on how to configure the following types of network design.

Avaya WLAN 8100 Quick Start Guide

Comments? infodev@avaya.com

October 2011

Table of Contents