Configuring the Wireless Controller using the WMS
Licensing the Wireless Management System software
The base Wireless Management (WMS) software allows domain configuration. However,
licenses are required for using the monitoring functionality within WMS. For more details on
downloading and installing the WMS server license, see
System software
Note:
You must have a Base License Certificate to initially license your WMS or to apply an
incremental license. Incremental licenses are optional. When you load an incremental
license, the base license file must also be present.
Configuring the Wireless Controller using the WMS
Before you begin
You must install the WMS before you can configure the WC using the WMS.
You must complete the following preliminary WC configuration before you can configure the
WC using the WMS:
1. Configure a management interface - Management IP.
2. Enable SNMP.
3. Enable MDC Capable.
Note:
WMS has network connectivity to WC.
About this task
Complete this procedure to configure the Wireless Controller (WC) using the WMS 8100
software.
Procedure
1. To connect to the WMS, launch a browser and type the WMS server IP address in
22
Avaya WLAN 8100 Quick Start Guide
on page 73. For licenses to take effect, stop and start WMS services.
the address bar.
Note:
The default login credentials are admin (username) and admin (password).
Comments? infodev@avaya.com
Licensing the Wireless Management
October 2011