Radio Waves - Alcatel 1B User Manual

Hide thumbs Also See for 1B:
Table of Contents

Advertisement

Average active efficiency: 74.7%
No-load power consumption: 0.08W

Radio waves ...................................

Proof of compliance with international standards
(ICNIRP) or with European Directive 2014/53/EU
(RED) is required of all phone models before they can
be put on the market. The protection of the health and
safety for the user and any other person is an essential
requirement of these standards or this directive.
THIS DEVICE MEETS INTERNATIONAL GUIDELINES
FOR EXPOSURE TO RADIO WAVES.
Your phone is a radio transmitter and receiver. It
is designed not to exceed the limits for exposure
to radio waves (radio frequency electromagnetic
fields) recommended by international guidelines. The
guidelines were developed by an independent scientific
organisation (ICNIRP) and include a substantial safety
margin designed to assure the safety of all persons,
regardless of age and health.
The radio wave exposure guidelines use a unit of
measurement known as the Specific Absorption Rate,
or SAR. The SAR limit for mobile devices is 2 W/kg.
15
Tests for SAR are conducted using standard operating
positions with the device transmitting at its highest
certified power level in all tested frequency bands. The
highest SAR values under the ICNIRP guidelines for this
device model are:
Maximum SAR for this model and conditions under
which it was recorded
Head SAR
GSM 900 + WLAN 2.4G
Body-worn
LTE Band 1 + WLAN 2.4G 1.65 W/kg
SAR
During use, the actual SAR values for this phone are
usually well below the values stated above. This is
because, for purposes of system efficiency and to
minimise interference on the network, the operating
power of your phone is automatically decreased when
full power is not needed for the call. The lower the
power output of the phone, the lower its SAR value.
Body-worn SAR testing has been carried out at a
separation distance of 5 mm. To meet RF exposure
guidelines during body-worn operation, the phone
should be positioned at least this distance away from
the body.
If you are not using an approved accessory ensure that
whatever product is used is free of any metal and that
it positions the phone the indicated distance away from
the body.
0.65 W/kg
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents