Installing The Reflectors For Middle Distance And Short Distance (Foil) - Siemens FDL241-9 Mounting, Commissioning

Linear smoke detector

Hide thumbs Also See for FDL241-9:

Table of Contents

Mounting / Installation

Installing the reflectors for middle distance and short distance (foil)

3.5 Installing the reflectors for middle distance and

20 | 44

5. Connect the wires to the terminals for the heating unit (3) according to the

connection diagram.

6. Install the prism unit (2) on the base with four screws.

short distance (foil)

WARNING

Danger of falling

Bodily injury

●

When installing, use a secured ladder or work platform.

The installation location of the reflector is defined according to the planning

information.

Install the reflector with one screw on a level surface. The diameter of the hole

is 4 mm.

A6V10332811_e_en_--

Table of Contents