Between Bracket Printer Sharing (Sdlc Only); Through 352 Communications Options; Entry Acceptance; Printer Authorization Matrix Acceptance - IBM 3274 Planning, Setup, And Customizing Manual

ModellA
213 Between Bracket Printer Sharing (SDLC Only)
Enter a 0 if Between Bracket Printer sharing is not allowed or a 1 if it is.
215
Enter 00000 for this sequence number in step 8 on the customizing form.
301
Enter 00 for this sequence number in step 8 on the customizing form.
302
Enter 00 for this sequence number in step 8 on the customizing form.
305 through 352 Communication Options
900
Entry Acceptance
For sequence numbers 305 through 352, fill in each of the appropriate boxes in step 8 of
the Initial Customizing Procedure Form with a O.
Sequence number 900, which appears as part of the sequence number 999 display,
prompts the operator to enter a 1 if, after the entries are verified, all the responses are
entered correctly. If incorrect responses are detected by the 3274, the 1 is automatically
changed back to a 0 by the 3274, an operator code is displayed for the incorrect
information, and incorrect entries are intensified.
901 Printer Authorization Matrix Acceptance
999
Modify Procedure
Sequence number 901, which appears as part of sequence number 022 (printer
authorization matrix display), prompts the operator to enter a 1 if, after the entries are
verified, all the responses are entered correctly. If unacceptable responses are detected by
the 3274, the 1 is automatically changed back to a 0 by the 3274 and invalid entries are
intensified.
Sequence number 999 displays all the responses entered during the customizing
operation, permitting the operator to review the entries and to make any corrections
needed. The Initial Customizing Procedure Form instructs the operator how to reply to
this sequence number.
Otapter 3. Preparing to Customize 3-9