Table of Contents
Advertisement
Summary of Amendments (March 1980)
to GA27-2827-S by Revision GA27-2827-6
This revision contains the following new material:
• Procedures for setting up and customizing the 3274
Model
SIC.
This
includes
updates
to
general
descriptions, sequence numbers, and diagrams for the
SIC.
.
• New sequence numbers for:
Structured field and attribute processing (SF AP)
Extended character set adapter
Programmed symbols terminals
Decompression
Advanced function keyboards
• An explanation of Configuration Support C.
• New 8421 codes.
• Chapter 7: Update Diskette Installation Procedure has
been rewritten to clarify the procedure.
• Sequence number 343 has been renamed Communica-
tion Interface Option and expanded to allow designation
of the X.21 Leased adapter.
• Sequence number 313 has had a second entry added:
Internal or External Clocking for BSC.
• The validation number has been changed to 06 through-
out the manual.
xiv
Summary of Amendments (October 29, 1979)
to GA27-2827-4 by Revision GA27-2827-S
This edition contains the follOWing significant changes from
the previous edition:
1. An explanation of the various levels of 3274 Configura-
tion Support has been added.
2. A recommended sequence for installing a 3274 sub-
system has been added .
3. Additional responses have been added to sequence
number 113 (Extended Function Store).
4. The following sequence numbers have been added to
the customizing process. Each requires a I-digit (0 or
1) response:
161 - Color (Models lA, IB, lC, and 10)
305 - BSC Printer Polling.(ModellC BSC only)
S. Sequence number 215 has been renamed "Physical
Unit Identification (PUID)," and its use has been
clarified.
6. Appendix 0 has been added to provide verification of
the 3274 subsystem after customizing is completed and
IML has been performed. The procedure in this
appendix should be given to the customizing operator
along with the filled-in customizing form.
7. Appendix E provides procedures for converging color
patterns on the 3274 during customizing.
8. The Validation Number has been changed to OS and
listed on the cover of the manual.
Advertisement
Table of Contents
