Overview Of Configuration Steps For Commissioning - Siemens SIMATIC PCS 7 BOX Manual

Additional Commissioning and Configuration
Required Software Installation on the External Engineering Station
•
SIMATIC PCS 7 V6.0 SP3, see PCS 7 readme file
•
PDM
Required Hardware on the SIMATIC PCS 7 BOX Station
•
WinAC 3.4 for SIMATIC S7 CPU 416-2 PCI
Required Software Installation on the SIMATIC PCS 7 BOX Station
•
SIMATIC PCS 7 V6.0 SP3, see PCS 7 readme file
Additional Information
PCS 7 readme file
5.1.2

Overview of Configuration Steps for Commissioning

Only the steps that deviate from the configuration variant "SIMATIC PCS 7 BOX as
single station system" and are marked in bold are available as links. The other
steps correspond to the "SIMATIC PCS 7 BOX as single station system"
configuration variant.
Commissioning/Configuration Steps
1 Configuring the PC stations using the Commissioning Wizard
2 Configuring the PC Using the Component Configurator
3 Creating a new PCS 7 project
4 Configuring a PCS 7 project and renaming the SIMATIC PC station
Adding an external ES to your PCS 7 project
5
Setting the hardware configuration of PC stations on the ES
6
7 Configuring NetPro for an external ES
8 Setting Time Synchronization
9 Checking if the PG/PC interface is set to "PC internal"
10 Opening the operator panel of the CPU 416-2 PCI
11 Compiling and downloading the AS and OS data
12 Setting the CPU 416-2 PCI to RUN
The configuration tasks should be carried out in the order they appear.
5-2
Process Control System PCS 7 - PCS 7 BOX
A5E00272813-01