Sony DVP-NC650V Service Manual page 15

Connecting to a Dolby Surround (Pro Logic) decoder amplifier (receiver) and
D
3 to 6 speakers
This connection will allow you to enjoy the surround effects of the Dolby Surround (Pro Logic)
decoder on your amplifier (receiver). If you have an AV amplifier (receiver) equipped with a
Dolby Digital or DTS decoder, refer to page 22.
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio or
multichannel audio (Dolby Digital) discs.
This connection needs a minimum of 3 speakers (front L and R, and rear (monaural)). The
surround effects are enhanced if 6 speakers (front L and R, center, rear L and R, and subwoofer)
are used.
If your amplifier (receiver) has R and L audio input jacks only, use
(receiver) has a digital input jack, use D-2
xRecommended surround sound effects using this connection with your amplifier (receiver)
• Dolby Surround (Pro Logic) (page 92)
z
For correct speaker setting location, please refer to the operating instructions of the amplifier (receiver).
Note
SACD audio signals are not output from a digital jack.
26
Step 4: Quick Setup
Follow the steps below to make the minimum number of basic adjustments to use the player. To
skip an adjustment press >, to return to the previous adjustment, press ..
./>
POWER
X x
/ , ENTER
A Turn on the TV.
B Switch the input selector on the TV to the player.
C Press POWER on the player and press
"Press [ENTER] to run QUICK SETUP." appears at the bottom of the screen. If this message
does not appear, select "QUICK" under "SETUP" in the Control Menu (page 77) to run Quick
Setup.
D Press ENTER without inserting a disc.
The Setup Display for selecting the language used in the on-screen display appears.
LANGUAGE SETUP
OSD:
MENU:
AUDIO:
SUBTITLE:
E Press X/x to select a language.
The player uses the language selected here to display the menu and subtitles as well.
28
D-1 . If your amplifier
.
? 1
/
1 2 3
4 5 6
7 8 9
0
./>
X x
/
ENTER
on the remote.
?/1
ENGLISH
ENGLISH
FRENCH
SPANISH
PORTUGUESE
SACD/DVD player
Coaxial digital cord
(not supplied)
or
Optical digital cord
(not supplied)
Remove the jack cap
before connecting.
to coaxial or optical
digital input
[Speakers]
Rear (L)
Rear (R)
Subwoofer Center
l: Signal flow
* When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear speakers and a
subwoofer.
Step 3: Connecting the Power Cord
Plug the player and TV power cords into an AC outlet.
Do not connect the power cord of your player to the "switched" power socket of an amplifier
(receiver). Otherwise, when you turn off the power of your amplifier (receiver), the settings for
the player may be lost.
F Press ENTER.
The Setup Display for selecting the aspect ratio of the TV to be connected appears.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
G Press X/x to select the item.
TV Type
4:3 standard TV
A wide-screen TV or 4:3 standard TV with the
wide-screen mode
H Press ENTER.
The Setup Display for selecting the type of jack used to connect your amplifier (receiver)
appears.
Is this player connected to an amplifier
(receiver)? Select the type of jack you
are using.
I Press X/x to select the item, then press ENTER.
Audio Cord Connecting Type
C-1
D-1
B-2 C-2 D-2
B-1 B-1 B-2
or both and
A
• When "NO" or "LINE OUTPUT L/R (AUDIO)" is selected, Quick Setup is finished and
connections are complete.
• When "DIGITAL OUTPUT" or "DIGITAL & 5.1CH OUTPUT" is selected, the Setup
Display for "DOLBY DIGITAL" appears.
1-6
Stereo audio cord
(red)
(not supplied)
(white)
or
(white) (red)
to audio input
[Speakers]
Amplifier (receiver) with
Dolby Surround decoder
Front (L)
Rear*
(mono)
4:3 LETTER BOX
4:3 LETTER BOX
4:3 PAN SCAN
16:9
You select Page
4:3 LETTER BOX or 4:3 79
PAN SCAN
16:9 79
YES
LINE OUTPUT L/R(AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
You select
LINE OUTPUT L/R (AUDIO)
DIGITAL OUTPUT
DIGITAL & 5.1CH OUTPUT
NO
Front (R)
27


continued
29