Access the main menu
1. Press the Menu key.
The main menu is displayed with the available options:
– SET: Access the setup menu
– CMD: Access the command menu
– PAS: Password entry
The selected option flashes.
The text for the selection scrolls in the alphanumeric display.
Set password
If the password needs to be set, the menu opens with the PAS option already selected.
1. Press
2. Confirm with
3. Press the Menu key to return to the measurement display.
3.3.2
Selection of measured values
Use the keys
is indicated by the unit in the upper left section of the display.
Some measurements may not be displayed on the device depending on programming and
the connection. If you have programmed for a system without a neutral conductor, for
example, the measurements for the neutral conductor will not be displayed.
7KT multimeter
Manual, 08/2018, 2514284149-01
or
to select an option.
.
and
to scroll through the measurement display pages. The current page
Description
3.3 7KT PAC1600 multimeter
17