Chapter 2 Before Setting Up; Connecting The Power Supply To The Printer - Epson TM-290-II Operator's Manual

Chapter 2 Before Setting Up

2 - 1 Connecting the Power Supply to the Printer

n
Plugging in the power supply
An external power unit is required because the printer has no power supply.
Connect the printer to the power unit using a power cable matching the
specifications of the power unit and printer.
CAUTIONS:
• The external power unit must supply 24 VDC.
• A difference between the specifications of the power unit and the
printer may cause abnormal operation or printer malfunction.
Connect the power unit according to the following procedure.
Turn off the power unit.
Connect the power cable to the printer's power connector.
Plug the power cable connector into the printer's power connector
with the arrow mark facing upward.
CAUTION:
• Remove the power cable by grasping the connector at the arrow
mark and pulling straight out.
Plug the power cord into the outlet, and turn on the power.
Power cable connector
- 6 -
I