Step Three: Install Handle - North Star 157140 Owner's Manual

Step 3 – Install handle.
• Slide handle onto handle receiver tubes.
• Insert (1) carriage bolt on each side.
• Tighten 5/16" locking knobs onto carriage bolts.
• Tighten bolts from step 2.
Fasteners Needed from Owner's Manual Bag:
Bolt, 5/16"-18 x 2" carriage
82233
(Qty 2)
Handle assembly
Bolt, 5/16"-18 x 2" carriage
Assembly
T-handle knob
T-handle knob
Handle receiver tube
Bolts from step 2
38578
(Qty 2)
14
Tools Needed
• 1/2" wrench