Input Settings; Adjusting The Input Signal - Roland UA-S10 Manual

Input Settings

Adjusting the Input Signal

1
Select the input signal that you want to adjust.
Input Drop-down list
MIC 1/2 jacks [MIC 1/2]
LINE IN jacks [LINE IN]
MIC 1, LINE IN R jacks [MIC 1/LINE R]
* If the breakout box is not connected to the
main unit's I/O port, [MIC 1/2] and [MIC 1/LINE
R] are not available for selection.
2
Adjust settings such as "Preamp" (p. 5) and
"Compressor" (p. 6)
1
2
Example connections
[MIC 1/2]
Front panel of the breakout box
[LINE IN]
Rear panel of the main unit
[MIC 1/LINE R]
Rear panel of the main unit
4
Front panel of the breakout box