Table of Contents
Advertisement
Section 3 - Configuration
Click the Virtual Volume icon in the Disk Management window or the Virtual Volume link in the left window to configure the
virtual volume. The Virtual Volume allows the ShareCenter Pro to expand its iSCSI capacity. By utilizing the built-in iSCSI initiator,
the ShareCenter Pro will be able to connect to other iSCSI targets on the network and convert them into virtual volumes.
These virtual volumes are seen as multiple single volumes on the ShareCenter Pro. Up to 8 virtual volumes can be stacked.
The ShareCenter 1100-04 acts as the storage stack master server. Virtual Volumes can be used to store and backup data, just
like a local volume.
Create
Click the button to add a virtual volume.
Edit
Select a target and click the button to change the
settings.
Delete
Select a target and click the button to remove the
virtual volume from the list.
Format
When using the virtual volume for the first
time, the volume must be formatted before
mounting to the ShareCenter Pro.
Connect/
Click Connect to link to a virtual volume. Click
Disconnect
Disconnect to terminate the connection.
D-Link ShareCenter Pro 1100-04 User Manual
Virtual Volume
166
Advertisement
Table of Contents
