HANDBRAKE
1
To release:
Pull lever 1 gently upwards, push in
button 2 and lower the lever to the
floor.
The red warning light on the
instrument panel will light up if
you are driving with the handbrake
not fully released.
Make
sure
handbrake is properly
released when driving,
otherwise
may occur.
2.08
To apply
Pull upwards, make sure that the
vehicle cannot move
2
additional two notches and to
engage a gear (1st or reverse) for
manual vehicles, or position P
that
the
for automatic vehicles.
overheating
Depending on the slope
and/or vehicle load, it
may be necessary to
apply the brake by an