Advertisement
CARE AND CLEANING
1. Unplug from outlet.
2. The Cover, Reamer, Strainer Assembly and Pitcher can be washed in warm
soapy water or in the top rack of the dishwasher. Wipe Base with a damp
cloth. DO NOT IMMERSE THE BASE IN WATER OR ANY OTHER LIQUID.
To separate the Upper and Lower Strainer, push on the Pulp Selector button
and grasp tab on Lower Strainer and gently pull apart. To re-assemble, line
up the inner circles of both the Upper and Lower Strainer making sure that the
Pulp Selector button in the Lower Strainer is in line with the slot for the Pulp
Selector in the Upper Strainer. Snap parts together.
To remove the Pitcher, hold Base and turn the Pitcher counterclockwise.
3. To reassemble, position the Pitcher so that the center hole fits over the shaft
of the Base. Turn clockwise until it clicks into position.
Place the Strainer Assembly on the Base so that the Pulp Selector is
positioned over the handle on the Pitcher.
Position the Reamer on the Strainer so that the shaft from the Base fits into
the center hole in the bottom of the Reamer.
Place cover on top of unit.
Advertisement
