Setting Room Temperature Range - Philips SCD489/05 User Manual

Philips dect baby monitor scd489
Hide thumbs Also See for SCD489/05:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
sound alert on/of
If the sound alert is switched on, the parent unit beeps as soon as the fifth sound level light starts to
burn orange while the volume is switched off..
1
Select X by pressing the – and + buttons and confirm by pressing the OK
button.

Select C or V and confirm by pressing the OK button.

Setting room temperature range

You can set the temperature range (minimum and maximum temperature) for your baby's room.
1
Select B– – ° by pressing the – and + buttons and confirm by pressing
the OK button.
N appears on the display.
,

Confirm by pressing the OK button.

Set the desired minimum temperature by pressing the – and + buttons and confirm by
pressing the OK button.

Set the desired maximum temperature by pressing the – and + buttons and confirm by
pressing the OK button.
Note: When the maximum temperature selected is lower than the room temperature, the unit consumes
more power because the display will be on continuously. This is also the case when the minimum
temperature set is higher than the room temperature.
temperature alert on/off
If the temperature alert is switched on, the parent unit beeps if the actual room temperature
exceeds the set maximum temperature or drops below the set minimum temperature. If no
temperature has been set, the temperature alert will go off when the room temperature drops
below 7°C or rises above 33°C.
1
Select B– – ° by pressing the – and + buttons and confirm by pressing
the OK button.

Select M by pressing the – and + buttons and confirm by pressing the OK
button.

Select C or V and confirm by pressing the OK button.
Cleaning and maintenance
Do not immerse the parent unit and the baby unit in water and do not clean them under the tap.
Do not use liquid cleaners or aerosol cleaners.
1
Unplug the baby unit, if it is connected to the mains, and take the parent unit out of the
charger.

Clean the parent unit and the baby unit with a damp cloth.
Make sure the parent unit is dry before you place it back in the charger.

Clean the charger with a dry cloth.
EngliSh
1

Advertisement

Table of Contents
loading

This manual is also suitable for:

Scd489/10Scd489/84Scd489

Table of Contents