Philips HP4608/10 User Manual page 9

The SoftPrecision cap reduces the number of epilating discs that are
active and stretches the skin during epilating.This makes the appliance
ideal for the more delicate areas of the body.
You will get the best results when the hairs are not too long (max. 0.5
B
mm).
1 Put the SoftPrecision cap on the epilating head (fig. 10).
The SoftPrecision cap can only be fitted onto the appliance in one way.
B
2 Switch the appliance on (fig. 11).
We advise you to select speed II.
3 Stretch the skin with your free hand (fig. 6).
4 Place the appliance perpendicularly onto your skin, with the
on/off slide pointing in the direction in which you are going to
move the appliance (fig. 7).
5 Move the appliance slowly over the skin, against the direction of
the hair growth (fig. 8).
Epilate your bikini line as shown in the figure (fig. 12).
Epilate your underarms as shown in the figure (fig. 13).
For a cool sensation, you can dab the area you have just epilated
with a cloth soaked in cold water.
Cleaning
For a good and smooth epilating result, it is essential that you clean the
epilating head after each use.
Never immerse the appliance in water.
Do not use aggressive cleaners, scouring agents, petrol, acetone etc.
to clean the plastic housing of the appliance.
Never try to remove the epilating discs from the epilating head. Do
not exert pressure on the shaving foil to avoid damaging it.
1 Switch the appliance off (fig. 9).
2 Remove the mains plug from the wall socket (fig. 14).
ENGLISH
9