Main Tab - Acer AN515-51 Service Manual

Main Tab

The Main tab allows the user to set the system time and date, enable or disable boot option, and
enable or disable recovery.
Information Main
System Time :
System Date :
Network Boot:
F12 Boot Menu:
Wake on LAN:
Touchpad:
Lid Open Resume:
Wake on USB while lid closed [Disabled]
D2D Recovery:
GPT Partition Recovery:
Clear GPT Partition
GPT Partition Record:
F1 Help
Exit
Esc
Item Name
System Time HH:MM:SS
System Date MM/DD/YY
Network Boot [Enabled] / [Disabled]
F12 Boot Menu [Enabled] / [Disabled]
Wake On LAN [Enabled] / [Disabled]
System Utilities
Advanced Security Boot
[19:10:49]
[01/01/2017]
[Disabled]
[Disabled]
[Disabled]
[Advanced]
[Enabled]
[Enabled]
[None]
[None]
No Record
Select Item F5/F6
Select Menu
Enter
Figure 2-2. BIOS Main (Windows 10)
Table 2-11. BIOS Main Tab Parameters (Windows 10)
Example
InsydeH20 Setup Utility
Exit
Change Values
Select Sub-Menu
►
• The format is the number of string.
• The hours are displayed with 24 hour format.
• The values set in the two fields take effect
immediately.
Default Network Boot value in different Boot Mode:
• [UEFI] Boot Mode: [Disabled]
• [Legacy] Boot Mode: [Enabled]
• This function enables or disables the ability that user
can press F12 while POST to quickly select boot
device.
• The boot device change is only for one time change.
In other words, the next time system reboots, the boot
device sequence will be the same as the one defined
in the BIOS Setup Utility -> Boot Menu.
• The default value is [Disabled].
• Wake on LAN feature allows someone to turn on a
network computer remotely by sending Magic Packet
even if system is in off state.
• The default value is [Disabled].
• Panel off when wake on LAN.
Item Specific Help
Hour valid range is from 0 to 23.
Minute Valid range is from 0
to 59. Second Valid range is from 0 to
59. REDUCE/INCREASE : F5/F6.
F9 Setup Defaults
F10 Save and Exit
Remark
Rev. 5.0
2-5