Using the Crisis Utility Disk
Turn off the target machine and ensure that the AC adapter is plugged in.
1.
Plug in the USB flash disk.
2.
Press and hold <Fn> and <Esc>, and continue with step 4.
3.
As the <Fn> and <Esc> keys are pressed, press the Power button to turn on the machine.
4.
Wait for 3 ~ 5 seconds to make sure the system fan is in full speed, and then release the <Fn>
and <Esc> keys.
Wait 3~5 minutes for the system to complete the Crisis operation. Once complete, the system
5.
will automatically power off.
System Utilities
Figure 2-108. Ensure the AC Adapter is Plugged In
Figure 2-109. Plug the USB Flash Disk
Figure 2-110. Hold Down <Fn> + <Esc>
2-63