Fuel Gauge; Handlebar Switches - Yamaha E115M Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Fuel gauge

F
E
The fuel gauge indicates the amount of
3
fuel in the fuel tank. The needle moves
towards "E" (Empty) as the fuel level
decreases. If this occurs, refuel as
soon as possible.
TIP
If the motorcycle is under long
operation, please ensure that
there is always fuel in the fuel
tank.
The main switch must be turned
to "ON" for the fuel gauge to
display an accurate fuel level
reading.

Handlebar switches

Left view
/
1. Dimmer switch " "
/
2. Turn signal switch " "
3. Horn switch " "
Right view
/
1. Lighting switch "
2. Starter switch " "
3-3
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
released, the switch returns to the
center position. To cancel the turn
signal lights, push the switch in after it
has returned to the center position.
Horn switch "
Press this switch to sound the horn.
Starter switch "
Push this switch to crank the engine
with the starter. See page 5-1 for
starting instructions prior to starting the
engine.
Lighting switch "
Switch to the "
position light, tail light, instrument light
are lit.
Switch to the "
tail light, instrument light are lit.
/ Switch to the "
"
position light, tail light, instrument light
are disconnected does not lit.
"
" for the high
" for the low beam.
"
". To signal a left-hand
". When
"
"
"
/ /
", headlight, front
", front position light,
", headlight, front