Changing Your Connectivity Settings; Network Settings - LG GX500 User Manual

TIP! Anti-theft Mobile tracker
(ATMT)
- Touch Security and ATMT.
When the handset is stolen,
handset sends the SMS to the
numbers configured by real
owner. User has to configure
the ATMT settings with Owner
Name, Alternate no (1),
Alternate no (2) etc. Default
ATMT code is "000000"
- ATMT SMS will contain
information about the stolen
phone IMEI, current location &
number of the person who is
using that handset.
Changing your connectivity
settings
Your connectivity settings have
already been set up by your
network operator, so you can
enjoy your new phone from the
off. If you want to change any
settings, use this menu.
Press and then scroll through
SETTINGS Tab. Select

Network settings

Select Network - If you set to
Automatic, GX500 automatically
searches for the network and
registers the handset to the
network. This is recommended
for best service and quality.
If you set to Manual all the
currently available networks are
shown and you can select one
of them for registration. If the
registration of the network has
failed, the network lists are listed
again and you can select any
other one for registration.
NOTE: When your handset loses
the network in manual mode,
the popup message to select the
available network will be shown
on the Idle screen.
Preferred lists - If the network is
searching automatically, you can
add a preferred network to be
connected to.
.
63