External Control Device Setup; Rs-232C Setup; Type Of Connector; D-Sub 9-Pin Male - LG 26LT360C Quick Reference Manual

EXTERNAL CONTROL DEVICE SETUP

RS-232C Setup

Connect the RS-232C (serial port) input jack to
an external control device (such as a computer or
an A/V control system) to control the product's
functions externally.
Connect the serial port of the control device to the
RS-232C jack on the product back panel.
NOTE
RS-232C on this unit is intended to be used
y y
with third party RS-232C control hardware
and software. The instructions below
are provided to help with programming
software or to test functionality using telenet
software. RS-232C connection cables are not
supplied with the product.
RS-232C IN
(CONTROL & SERVICE)
EXTERNAL CONTROL DEVICE SETUP
Type of connector;
D-Sub 9-Pin Male
1
6
RS-232C IN
(CONTROL & SERVICE)
No.
1 3.5V
2 RXD
3 TXD
4 IR out from TV
5 GND
6 NC (No connection)
7 NC (No connection)
8 NC (No connection)
9 NC (No connection)
23
5
9
Pin name