LG 32LT560E Quick Reference Manual

Quick reference guide
Hide thumbs Also See for 32LT560E:

Advertisement

QUICK REFERENCE GUIDE
LED LCD TV
Please read this manual carefully before operating your set and retain it
for future reference.
22LT560C
32LT560E
26LT560C
37LT560E
32LT560C
42LT560E
37LT560C
47LT560E
42LT560C
P/NO : MFL67415402 (1204-REV03)
www.lgsolutions.com

Advertisement

Table of Contents
loading

Summary of Contents for LG 32LT560E

  • Page 1 QUICK REFERENCE GUIDE LED LCD TV Please read this manual carefully before operating your set and retain it for future reference. 22LT560C 32LT560E 26LT560C 37LT560E 32LT560C 42LT560E 37LT560C 47LT560E 42LT560C www.lgsolutions.com P/NO : MFL67415402 (1204-REV03)
  • Page 2: Licenses

    In addition to the source code, all referred license terms, warranty disclaimers and copyright notices are available for download. LG Electronics will also provide open source code to you on CD-ROM for a charge covering the cost of performing such distribution (such as the cost of media, shipping and handling) upon email request to opensource@lge.com.
  • Page 3: Important Safety Instructions

    IMPORTANT SAFETY INSTRUCTIONS IMPORTANT SAFETY INSTRUCTIONS Always comply with the following precautions to avoid dangerous situations and ensure peak performance of your product. Read these instructions. Keep these instructions. WARNING/CAUTION Heed all warnings. Follow all instructions. RISK OF ELECTRIC SHOCK DO NOT OPEN Do not use this apparatus near water.
  • Page 4 IMPORTANT SAFETY INSTRUCTIONS Protect the power cord from being walked on Keep the packing anti-moisture material or or pinched particularly at plugs, convenience vinyl packing out of the reach of children. receptacles, and the point where they exit Anti-moisture material is harmful if from the apparatus.
  • Page 5 Do not attempt to modify this product in any removed. It may take 2 or more people to way without written authorization from LG carry larger TVs. Do not press or put stress Electronics. Unauthorized modification could on the front panel of the TV.
  • Page 6 IMPORTANT SAFETY INSTRUCTIONS If you smell smoke or other odors coming If the TV feels cold to the touch, there may from the TV, unplug the power cord and be a small “flicker” when it is turned on. This contact an authorized service center. is normal, there is nothing wrong with TV.
  • Page 7: Table Of Contents

    TABLE OF CONTENTS TABLE OF CONTENTS LICENSES REMOTE CONTROL OPEN SOURCE SOFTWARE NOTICE GENERAL TROUBLESHOOTING IMPORTANT SAFETY INSTRUCTIONS CAUTION FOR USING EzSIGN 2.0 TABLE OF CONTENTS SPECIFICATIONS INSTALLATION PROCEDURE IR CODES ASSEMBLING AND PREPARING EXTERNAL CONTROL DEVICE SETUP Unpacking RS-232C Setup Optional Extras (For LT560E series) Type of connector;...
  • Page 8: Installation Procedure

    ASSEMBLING AND PREPARING INSTALLATION PROCEDURE Open the package and make sure all the accessories are included. Attach the stand to the TV set. Connect an external device to the TV set. ASSEMBLING AND PREPARING Unpacking Check your product box for the following items. If there are any missing accessories, contact the local dealer where you purchased your product.
  • Page 9 ASSEMBLING AND PREPARING For LT560C series ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote control, Quick Reference Guide Power Cord Batteries (AAA) (See p.18) (For 32/37/42LT560C) (For 22LT560C) (For 26LT560C) Stand body/Stand base Stand body/Stand base...
  • Page 10: Optional Extras (For Lt560E Series)

    ASSEMBLING AND PREPARING For LT560E series ENERGY AV MODE INPUT SAVING FLASHBK LIST MARK MUTE MENU INFO Q.MENU ENTER BACK EXIT L/R SELECT FREEZE RATIO Remote control, Quick Reference Guide EzSign 2.0 Editor CD Power Cord Batteries (AAA) (See p.18) Stand body/Stand base Stand Screws Desk-mount Screw...
  • Page 11: Parts And Buttons

    ASSEMBLING AND PREPARING Parts and buttons Remote control Power indicator Side Connection panel Screen Buttons (For 22/26LT560C) input HDMI input Buttons (For 32/37/42LT560C, 32/37/42/47LT560E) Speakers AV IN RGB IN (PC) Rear Connection (For 22/26LT560C) panel DC IN RS-232C IN (CONTROL & SERVICE) EXTERNAL SPEAKER OUT ANTENNA/...
  • Page 12: Setting Up The Tv

    ASSEMBLING AND PREPARING Setting up the TV Put your TV on a pedestal stand and mount the TV on a table or wall. Attaching the stand If you are not mounting the TV to a wall, use the following instructions to attach the stand. (For 32/37/42LT560C, 32/37/42/47LT560E) 4 EA M4 x 14...
  • Page 13 ASSEMBLING AND PREPARING (For 22/26LT560C) 4 EA M4 x 12 Stand Body M4X20 Front CAUTION Stand Base When attaching the stand to the TV set, place the screen facing down on a cushioned table or flat surface to protect Top View the screen from scratches.
  • Page 14: Mounting On A Table

    ASSEMBLING AND PREPARING Mounting on a table Adjusting the angle of the TV to suit view (Depending on model) Lift and tilt the TV into its upright position on a Swivel 90±4 degrees to the left or right and adjust table.
  • Page 15: Mounting On A Wall

    When you attach the TV to other building (For 32/37/42LT560C, 32/37/42/47LT560E) materials, please contact qualified personnel. LG recommends that wall mounting be performed by a qualified professional installer. 10 cm 10 cm...
  • Page 16 If you install the TV on a ceiling or slanted wall, it may fall and result in severe injury. Use an authorized LG wall mount and contact the local dealer or qualified personnel. Do not over tighten the screws as this may cause damage to the TV and void your warranty.
  • Page 17: Tidying Cables

    ASSEMBLING AND PREPARING Tidying cables External speaker out Connect the external speaker. For 32/37/42LT560C, 32/37/42/47LT560E Install the power cord holder and power cord. It will help prevent the power cable from being AV IN RGB IN (PC) removed by accident. DC IN RS-232C IN (CONTROL &...
  • Page 18: Remote Control

    REMOTE CONTROL REMOTE CONTROL The descriptions in this manual are based on the buttons on the remote control. Please read this manual carefully and use the TV correctly. To replace batteries, open the battery cover, replace batteries (1.5 V AAA) matching ends to the label inside the compartment, and close the battery cover.
  • Page 19 REMOTE CONTROL Adjusts the volume level. CC, CHAR/NUM CC: Selects a closed caption. CHAR/NUM: Switches between Letter and Number input modes. TIMER Turns the TV off in a set amount of time. Q.MENU MUTE , DELETE MUTE: Mutes all sounds. BANK CH.PREVIEW DELETE: Deletes letters and numbers.
  • Page 20: General Troubleshooting

    GENERAL TROUBLESHOOTING / CAUTION FOR USING EZSIGN 2.0 GENERAL TROUBLESHOOTING Display Panel Picture Symptom Possible Cause(s) Possible Solution(s) No picture. Display panel is turned off. Turn TV ON. Power failure? Antenna/cable not connected. Connect antenna/cable signal to TV. Connections incorrect. Check connections on TV.
  • Page 21: Specifications

    Without stand 3.1 kg (6.8 lbs) 4.1 kg (9.0 lbs) 32LT560C 37LT560C (32LT560C-UA) (37LT560C-UA) MODELS 32LT560E 37LT560E (32LT560E-UA) (37LT560E-UA) Dimensions With stand 765.6 mm x 535.6 mm x 231.9 mm 867.3 mm x 592.8 mm x 231.9 mm (W x H x D) (30.1 inch x 21.0 inch x 9.1 inch)
  • Page 22 SPECIFICATIONS RGB(PC), HDMI (PC) supported mode Horizontal Vertical Resolution Frequency (KHz) Frequency (Hz) 720x400 31.469 70.08 640x480 31.469 59.94 800x600 37.879 60.31 1024x768 48.363 60.00 1360x768 47.712 60.015 1280x1024 63.981 60.020 For 37/42LT560C, 37/42/47LT560E 1920x1080 67.5 60.00 HDMI (DTV) supported mode Horizontal Vertical Resolution...
  • Page 23: Ir Codes

    IR CODES IR CODES (Depending on model) Code Code Function Note Function Note (Hexa) (Hexa) POWER Remote control Button Remote control Button (Power On/Off) Remote control Button Q.MENU Remote control Button EXIT Remote control Button Home or MENU Remote control Button PORTAL Remote control Button INPUT...
  • Page 24: External Control Device Setup

    EXTERNAL CONTROL DEVICE SETUP EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Type of connector; D-Sub 9-Pin Male Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally.
  • Page 25: Rs-232C Configurations

    EXTERNAL CONTROL DEVICE SETUP RS-232C configurations Set ID Set ID number. 7-Wire Configuration (Serial female-female NULL modem cable) OPTION ꔂ Move ꔉ OK • Language • Caption : Off • Standby Light : On • My Media Setting • Initial Setting •...
  • Page 26: Communication Parameters

    EXTERNAL CONTROL DEVICE SETUP Communication Parameters Baud rate: 9600 bps (UART) Stop bit: 1 bit Data length: 8 bits Communication code: ASCII code Parity : None Use a crossed (reverse) cable. Command reference list DATA DATA COMMAND1 COMMAND2 COMMAND1 COMMAND2 (Hexadecimal) (Hexadecimal) 01.
  • Page 27: Transmission / Receiving Protocol

    EXTERNAL CONTROL DEVICE SETUP Transmission / Receiving protocol Transmission [Command1][Command2][ ][Set ID][ ][Data][Cr] [Command 1] : First command to control the set.(j, k, m or x) [Command 2] : Second command to control the set. [Set ID] : You can adjust the set ID to choose desired set ID number in Option menu. Adjustment range is 1~ 99.
  • Page 28 EXTERNAL CONTROL DEVICE SETUP 01. Power (Command: k a) 06. Volume Control (Command: k f) To control Power On/Off of the set. To adjust volume. You can also adjust volume with the volume buttons on Transmission [k][a][ ][Set ID][ ][Data][Cr] remote control.
  • Page 29 EXTERNAL CONTROL DEVICE SETUP 12. OSD Select (Command: k l) 3D Depth: Min : 00 ~ Max : 14 To select OSD (On Screen Display) on/off. (*transmit by Hexadecimal code) Transmission [k][l][ ][Set ID][ ][Data][Cr] *If data01 is 00(3D On), data04 has no meaning. *If data01 is 01(3D Off) or 02(3D to 2D), data02, data03 Data 00: OSD off Data 01: OSD on...
  • Page 30 EXTERNAL CONTROL DEVICE SETUP 20. Energy Saving (Command: j q) Data 03 & 04 = No Minor = 00 00 Data 05 = 0000 0001 in binary = 01 To control the energy saving function. Total = ma 00 23 00 00 00 00 01 Transmission [ j ][q][ ][Set ID][ ][Data][Cr] Data 00: off 2.
  • Page 31 EXTERNAL CONTROL DEVICE SETUP * Table List (Channel Tuning) Two/One Using Main/Sub Part Physical Step Picture Reserved Channel Channel Main NTSC Air No Use NTSC Cable ATSC Air ATSC Cable_std ATSC Cable_hrc ATSC Cable_irc ATSC cable_auto Reserved Reserved...
  • Page 35 CHILD SAFETY: It Makes A Difference How and Where You Use Your Flat Panel Display Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind: THE ISSUE y The home theater entertainment experience is a growing trend and larger flat panel displays are popular purchases.
  • Page 36 Register your product Online! www.lg.com This product qualifies for ENERGY STAR in the Pro:Centric is a trademark of LG Electronics U.S.A., Inc. Pro:Idiom is “factory default (Home Use)” setting. a registered trademark of Zenith Electronics LLC. b -LAN is a Changing the factory default settings or enabling other trademark of LodgeNet Interactive Corporation.

Table of Contents