Cleaning The Attachments - Philips HP6572/00 User Manual

Cleaning the attachments

1 Remove the attachment from the epilating head (Fig. 5).
2 Remove loose hairs from the attachments with the cleaning brush (Fig. 17).
3 Rinse the attachments with lukewarm water while turning them (Fig. 18).
4 Dry the attachments before you use or store them.
Cleaning the epilating head of the epilator
1 Press the release knob (1) and remove the epilating head from the appliance (2) (Fig. 10).
2 Remove loose hairs with the cleaning brush (Fig. 19).
3 Rinse the epilating head under the tap for 5-10 seconds while turning the tweezers with your
thumb (Fig. 20).
Note: Never try to detach the epilating tweezers from the epilating head.
4 Shake the epilating head firmly (Fig. 21).
5 Dry the epilating head thoroughly with a tea towel.
Note: Make sure the epilating head is completely dry before you place it back onto the appliance.
6 To reattach the epilating head, place it on the appliance and press it onto the appliance until it
snaps home ('click') (Fig. 22).
Cleaning the sensitive area shaving head and the trimming comb (HP6572 only)
1 Remove the trimming comb, if attached, by pulling it off the sensitive area shaving
head (Fig. 23).
2 Remove the sensitive area shaving head by pressing the release button (Fig. 24).
3 Remove the shaving unit from the sensitive area shaving head (Fig. 25).
4 Rinse the shaving unit, the sensitive area shaving head and the trimming comb under a
lukewarm tap for 5 to 10 seconds while turning them a little (Fig. 26).
5 Shake the shaving unit, the sensitive area shaving head and the trimming comb firmly (Fig. 27).
6 Dry the sensitive area shaving head and the trimming comb thoroughly with a tea towel and
let the shaving unit dry.
Note: Do not exert any pressure on the shaving unit to avoid damage.
7 Reattach the shaving unit to the sensitive area shaving head. Place the sensitive area shaving
head on the appliance and press it onto the appliance until it snaps home ('click').
Note: Make sure the shaving unit is dry before you attach it to the sensitive area shaving head and the
sensitive area shaving head is completely dry before you place it back onto the appliance.
8 Put the trimming comb on the sensitive area shaving head.
Tip: Rub a drop of sewing machine oil onto the shaving unit twice a year to extend the lifetime of the
cutting element.
storage
- Put the trimming comb on the sensitive area shaving head to prevent damage (HP6572 only).
- Store the appliance and the accessories in the luxury pouch.
4203.000.4532.1.indd 11
EnglisH
11
08-12-09 12:31