Related Manuals for Zhone SkyZhone 1600
Summary of Contents for Zhone SkyZhone 1600
- Page 1 SkyZhone 1600, 1400, 1200 Hardware Installation Guide For software version 1.2.2.x Document Part Number: 830-01818-02 June, 2008...
-
Page 2: Important Safety Information
Further, Zhone Technologies reserves the right to revise this publication and to make changes from time to time in the contents hereof without obligation of Zhone Technologies to notify any person of such revision or changes. -
Page 3: Modifications To Equipment
24 inches from any power lines. Use caution when installing this outdoor equipment. FCC RF Exposure Requirements (per OET-65) requires the SkyZhone platform to be mounted such that the general public does not come within 10 inches of the antennae. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... - Page 4 Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. SkyZhone 1600, 1400, 1200 Hardware Install Guide...
-
Page 5: Professional Installation Caution
Sufficient clearance must exist on all sides of the rack to permit equipment access. Connect the system to the power supply circuit as described in this document. Do not overload the system or power supply circuit. Ensure that proper system grounding is performed and maintained. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 7: Table Of Contents
Mounting the Optional Cover:........................35 Grounding ..............................39 Initial Configuration.............................40 Using the Ethernet Interface ..........................40 Factory Defaults .............................40 Changing the Factory Defaults ........................41 Complete Default Settings ..........................42 Configuring the MALC ..........................44 Chapter 3 Diagnostics — Status and LED SkyZhone 1600, 1400, 1200 Hardware Installation Guide... - Page 8 Technical Support ............................47 Service Requirements ..........................47 EMI Notices..............................48 United States - EMI Notice ........................48 Canada - EMI Notice ..........................48 Supplier’s Declaration of Conformity ......................49 Notice to Users of the Canadian Telephone Network................50 CE Marking ..............................50 SkyZhone 1600, 1400, 1200 Hardware Install Guide...
-
Page 9: About This Guide
A note provides important supplemental or amplified information. Tip: A tip provides additional information that enables users to more readily complete their tasks. WARNING! A warning alerts users to conditions or actions that could lead to injury or death. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 10: Typographical Conventions
Vertical bar | indicates the OR symbol. Related documentation Refer to the following publication for additional information: SkyZhone CLI Explains how to use the Zhone command line interface Reference Guide (CLI) and describes the system commands and parameters. Release Notes... -
Page 11: Acronyms
Acronyms The following acronyms are related to Zhone products and may appear throughout this manual: Table 1: Acronyms and their descriptions Acronym Description ADSL Asymmetrical Digital Subscriber Line Access Point Auto Configuration Server DHCP Dynamic Host Configuration Protocol Digital Subscriber Line... -
Page 12: Contacting Global Service And Support
Contacting Global Service and Support Contact Global Service and Support (GSS) if you have any questions about this or other Zhone products. Before contacting GSS, make sure you have the following information: • Zhone product you are using • System configuration •... -
Page 13: The Skyzhone Access Point
Public Safety traffic over Internet Access traffic. Remote configuration and troubleshooting is supported via SSH and HTTPS to SkyZhone access points through a separate management VLAN. In addition, a console port is provided for local access to the CLI. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... - Page 14 SkyZhone also includes an Ethernet (with Aux Power) port which provides for connectivity from the SkyZhone access point to a video camera or other 48V accessories. This port can provide up to 35 Watts of power. SkyZhone 1600, 1400, 1200 Hardware Install Guide...
-
Page 15: Skyzhone Models
Supports wireless radio transmission of 4.9 GHz 802.11a. A single 10/100 Ethernet is used for backhaul. 120VAC power is required. • SkyZhone-1200 Wi-Fi Access Point Supports wireless radio transmission of 2.4 GHz 802.11b/g. A single 10/100 Ethernet is used for backhaul. 120VAC power is required. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 16: Coverage Area
Internet Access, Voice over IP, Mobile Video, or Enterprise VPN. The 4.9 GHz radio operates in the licensed spectrum reserved for Public Safety users including city government, police, fire and EMT. Figure 2: SkyZhone network configuration SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 17: Skyzhone Port Connectors
Figure 4: SkyZhone-1x00 port connectors AC Power AC Power Note: Sealing caps provided with the unit must be placed on unused connectors. Without these caps in place the unit is no longer waterproof (IP66 rated). SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 18: Ethernet (Plus Aux Power) Socket Connector
The Ethernet connector is capable of sourcing power to other devices. Some devices may not be compatible with this feature. In that case, do not connect the wires that supply the power, or use the Data Only cable. SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 19: Console Socket Connector
Any cabling to the console connector must be removed from the permanent installation to avoid shock hazards. Dust caps must be installed to maintain an IP66 rating. Figure 7: Console SOCKET connector Table 5: Console SOCKET connector pinouts Signal DCE_RXD No connection DCE_TXD SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 20: Ac Power Plug Connector
An alternate 5’ cord with a NEMA-15, 3-wire plug can be ordered as well. Grounding Proper grounding must be complete before you connect power to the unit. See Grounding on page 39. SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 21: Cables
- 5 foot console cable Souriau UTS6JC1210SX104C5) 810-07905-01 30 foot console cable ( Souriau UTS6JC1210SX104C30) - Table 7: Console Cable Signal Cable wire color 9-pin DIN DCE_RXD Green No connection DCE_TXD Brown Brown/White SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 22: Ethernet Data Cable
The cables shown in Table 8 & 9 conform to the EIA-568-B wire color coding for Ethernet data. Table 8: Ethernet (Data Only) Cable Signal Cable wire color RJ-45 TX_P White/Orange TX_N Orange RX_P White/Green RX_N Green No Connection Blue White/Blue Return_48V White/Brown Brown No Connection SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 23: Ethernet Data And Power Cable
The Ethernet connector is capable of sourcing power to other devices. Some devices may not be compatible with this feature. In that case, do not connect the wires that supply the power, or use the Data Only cable shown in Table-8. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 24: Ethernet Data And Power Cable (Early Version)
Part number: UTS6JC1210PX103A10 Part number: UTS6JC1210PX103B5 Part number: UTS6JC1210PX103B30 Part number: UTS6JC1210PX103B10 TX_P Blue White/Orange TX_N White/Blue Orange RX_P Orange White/Green RX_N White/Orange Green No Connection Green Blue White/Blue Return_48V White/Green White/Brown Brown No Connection SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 25: Preparing For Installation
Operating Temperature F to 131 F (-35 C to 55 Power 120VAC, 60Hz, 45W Maximum. Backhaul 10Mbps/100Mbps Regulatory FCC Part 15, Subpart-C (15.247) Certifications FCC Part 15, Class A FCC Part 90 UL60950-1 SkyZhone 1600, 1400, 1200 Hardware Installation Guide... - Page 26 Up to 1800 feet 2.4 GHz 802.11 b/g and 4.9 GHz 802.11a Connector Type 4 pin circular I/O SOCKET (Console I/F) 8 pin circular I/O SOCKET (ETHERNET I/F) 4 pin circular I/O PLUG (AC Power I/F) Ethernet I/F Data Rate 10Mbps/100Mbps Number of Ports SkyZhone 1600, 1400, 1200 Hardware Install Guide...
- Page 27 IEEE 802.1Q Traffic Prioritization IEEE 802.1p, 802.11e, IP TOS Number of Priority Queues Traffic Classification Based on priority bits, protocol type, IP address Rate Limiting Upstream and downstream rate limiting per classified flow SkyZhone 1600, 1400, 1200 Hardware Installation Guide...
-
Page 28: Installing The Skyzhone Access Point
6 (six) mounting screws for the decorative cover • 1 driver bit for the tamper-resistant screws • Not included: 4 screws that will go through the metal bracket, plastic cover and into your wall’s surface. SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 29: Wall-Mount Kit (Without Plastic Cover)
• Cordless screwdriver with a 2 1/2 " extension to be able to secure the tamper-resistant screws, or a screwdriver that can receive a tamper-resistant screw that is at least three inches long. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 30: Mounting The Skyzhone To A Pole
Choose the one most appropriate for this installation. Figure 7: Threading screw clamp bands through mounting plate slots Secure the screw clamp bands around the pole, using a large slotted screwdriver. SkyZhone 1600, 1400, 1200 Hardware Install Guide... - Page 31 Tighten and if necessary, trim off any excess tension band. Secure the mounting bracket to the pole. The SkyZhone shelf is attached to the poll-mounting bracket. The shelf may need to be adjusted so that it is level. SkyZhone 1600, 1400, 1200 Hardware Installation Guide...
- Page 32 Insure that the Chassis Ground is properly connected before the next steps Attach the Ethernet cable. Attach the AC power cable to the unit (other end connected to AC Mains by a licensed electrician per local and national codes. SkyZhone 1600, 1400, 1200 Hardware Install Guide...
- Page 33 The same instructions apply to the installation on a horizontal pole or any other orientation as shown in the figure below. Figure 10: The bracket and sunshield mounted on a horizontal pole SkyZhone 1600, 1400, 1200 Hardware Installation Guide...
-
Page 34: Mounting The Skyzhone To The Side Of A Building
Figure 11: SkyZhone with a cover The SkyZhone wall mount enclosure kit (920-07811-01) includes the following items: • • front cover • bracket and base These items are also displayed in Figure 12: SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 35: Mounting The Optional Cover
Place the mounting bracket on the rear panel of the cover, lining up the mounting holes. Fasten the mounting bracket in the desired location with the appropriate type of screw. Use the outside holes displayed in Figure 14. These should line up with the holes in the cover. SkyZhone 1600, 1400, 1200 Hardware Installation Guide... - Page 36 Attach the protective cover to the base and then attach the base to the (concrete) wall. Note that the cover should be attached so that the top contains the two cutouts for the angled antennas. SkyZhone 1600, 1400, 1200 Hardware Install Guide...
- Page 37 Attach the lid of the protective cover and secure it with the screws provided in the installation kit. The final assembly appears in Figure 16, and the final installation appears in Figure 17. SkyZhone 1600, 1400, 1200 Hardware Installation Guide...
- Page 38 Figure 16: Wall Mount Kit - Final Assembly Figure 17: Example of a wall-mounted SkyZhone SkyZhone 1600, 1400, 1200 Hardware Install Guide...
-
Page 39: Grounding
See Figure 18. • Connect the other end of the grounding wire strap that is attached to a grounded surface or another earth ground such as a metal rod. Figure 18: Grounding lug SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 40: Initial Configuration
HTTPS to configure the remaining parameters. Note that the SkyZhone access point uses HTTPS and not HTTP. The default login is admin and the default password is zhone. Note that if the IP address of the management VLAN is changed, you lose your connection to the SkyZhone unit. -
Page 41: Changing The Factory Defaults
/config vlan vlanconfig addport interface eth0 vlanid 122 tagged /config admin-tools save running-config These commands create the following configuration: VLAN Tag/Untagged Port IP address Untagged eth1(Ethernet) 10.108.14.218 Tagged eth1 (Ethernet) Untagged wlan0 SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 42: Complete Default Settings
WLAN 0 SSID security none none WLAN 0 Admin State WLAN 0 Radio Name 2.4GHz 2.4GHz WLAN 0 Hardware Mode WLAN 0 Rates auto auto WLAN 0 Channel Policy Fixed Fixed WLAN 0 Channel SkyZhone 1600, 1400, 1200 Hardware Install Guide... - Page 43 2 dB Attenuation WLAN 1 Antenna Select auto Auto System Configuration Host Name SkyZhone SkyZhone SkyZhone Domain Name SkyZhoneDomain SkyZhoneDomain SkyZhoneDomain Primary DNS 0.0.0.0 0.0.0.0 0.0.0.0 Secondary DNS 0.0.0.0 0.0.0.0 0.0.0.0 GPS Location Latitude SkyZhone 1600, 1400, 1200 Hardware Installation Guide...
-
Page 44: Configuring The Malc
Date Time Time Zhone Eastern Eastern Eastern Save Auto save Running Disable Disable Disable Config Configuring the MALC Instructions for connecting the MALC to the SkyZhone are found in the MALC Configuration Guide. SkyZhone 1600, 1400, 1200 Hardware Install Guide... -
Page 45: Chapter 3 Diagnostics - Status And Led
If the LED stays in this state for more than one minute, the unit should be replaced. One blink every 5 Power is on and the unit is operational. seconds There is no power SkyZhone 1600, 1400, 1200 Hardware Installation Guide... -
Page 47: Appendix A: Technical Support And Certifications
• Certifications, page 48 Contacting Global Service and Support Contact Global Service and Support (GSS) if you have any questions about this or other Zhone products. Before contacting GSS, make sure you have the following information: • Software version running on the system •... -
Page 48: Emi Notices
Please refer to the following EMI notices. United States - EMI Notice • Changes or modifications not expressly approved by Zhone Technologies, Inc. could void the user's authority to operate the equipment. • The supplied cables and antennae must be used to ensure compliance with Part 15 and Part 90, FCC Rules. -
Page 49: Supplier's Declaration Of Conformity
Largo, FL 33773-1502 Date of Issue: January 20, 2008 Zhone Technologies, located at the above address, hereby certifies that the SKYZHONE- 1200/1400/1600 bearing the FCC identification numbers PJZSZ1224, PJZSZ1424, PJZSZ1624 complies with the Federal Communications Commission's ("FCC") Rules and Regulations pursuant to part 15, subpart C (14.247), part 15 Class A and part 90, as appropriate. -
Page 50: Notice To Users Of The Canadian Telephone Network
NOTICE: This equipment has been certified to ITU-T G991.2 CE Marking When the product is marked with the CE mark on the equipment label, a supporting Declaration of Conformity may be downloaded from the Zhone World Wide Web site at www.zhone.com. SkyZhone 1600, 1400, 1200 Hardware Install Guide...