Hang the LCD screen on the hanger rod.
Step 6
You may need to move the left and right screens to allow placement of the LCD screen.
Note
Rotate the LCD screen forward by pulling the bottom toward you and move the hinged pieces on the
Step 7
center frame brackets to the down position.
Figure 1-37
Connect the cables for the display by following the diagrams in the
Step 8
Be sure to connect the serial cable from the auxiliary control unit to the "RS232C IN" connection of the
Note
presentation display (the serial connection that is closest to the conference participants).
46
Moving the Hinged Pieces Down on the Center Display Bracket
Figure 1-44
through
Figure
OL-23393-01
1-46.