EN 16
4.
PB52.1HU LA
4.3.8
LCD Panel
Refer to figure "LCD Panel" for details.
1. Unplug the LVDS connector [1].
Caution: be careful, as this is a very fragile connector!
2. Unplug the connectors [2].
3. Remove the fixation screws [3] and [4].
4. Lift the subframe from the set.
5. The LCD panel can now be lifted from the front cabinet.
4.4
Set Re-assembly
To re-assemble the whole set, execute all processes in reverse
order.
Notes:
•
While re-assembling, make sure that all cables are placed
and connected in their original position. See see figure 4-2
Cable dressing 32".
•
Pay special attention not to damage the EMC foams on the
SSB shields. Ensure that EMC foams are mounted
correctly.
Mechanical Instructions
3
4
2
4
3
3
3
Figure 4-13 LCD Panel
3
3
4
1
4
3
3
2
3
I_17500_064.eps
180408