Weather Mode Annunciators - Honeywell PRIMUS 1000 Pilot's Manual

D
Weather Radar Modes – When weather is selected on the display
controller, weather information is displayed on the arc format. Each
PFD can display independently selected weather information. The
mode annunciators, described in Table 3–21, are displayed to the
left of the compass arc.
Display
Annunciator
WAIT
STBY
FSBY
WX
WX
RCT
GCR
CR/R
GMAP
TEST
FAIL
FPLN
R/T
WX/T
TX
NOTE: If WX is not selected for display, but is active and valid and is in either the
STBY, FPLN, FSBY, or WAIT modes, nothing is displayed.
A28–1146–134
REV 1 Jan/03
PRIMUS
Mode Description
Power–up about one minute
Normal standby
Forced standby (weight–on–wheels)
Normal weather
Invalid weather, or forced standby is overridden
and the radar is on and transmitting
Normal weather with RCT
Normal weather with ground clutter reduction
Normal weather with GCR and RCT
Ground map mode
Test mode with no faults
Test mode with faults
Flight plan mode
Weather with RCT and turbulence detection
Normal weather with turbulence detection
Weather is transmitting but not selected for
display and not in STBY, FSBY, WAIT, or FPLN

Weather Mode Annunciators

Table 3–21
Electronic Flight Instrument System (EFIS)
R
1000 Integrated Avionics System
3-53