Table of Contents
Advertisement
Device overview
1
connection terminals a, b, P, M, V1 and V2
2
matching resistor (jumper for video IN)
3
type label
4
SD card (not enclosed in the delivery)
5
RJ45 socket with status LED (network connection)
Indication and operating elements
LED green
LED yellow (error indi-
cation network)
LED red (error indica-
tion TCS:BUS)
8
OFF:
ON:
BLINKS (slowly, 1 Hz):
BLINKS (fast, 4 Hz):
ON:
BLINKS (slowly, 1 Hz):
BLINKS (fast, 4 Hz):
OFF:
ON:
BLINKS (slowly, 1Hz):
OFF:
6
WEL button (reset of network settings and passwords)
7
button reset (device restart)
8
LED red (error indication TCS:BUS)
9
LED yellow (error indication network and SD card
10
LED green (indication for operational readiness)
device is out of service
operational readiness (the start process of the FBI6119-0400 is
finished)
WEL button is pressed (0 to 8 seconds)
network settings and password will be reset (press the WEL
button for 8 seconds)
start process of the device
error in the network
error SD card (unreadable)
no error in the network or with SD card
firmware update is updated
error in TCS:BUS
no error in TCS:BUS
Advertisement
Table of Contents
