Philips Norelco G270/60 User Manual page 14

Cleaning
◗
Do not use water or a moist cloth to clean
the Groomer.
◗
Always switch Groomer OFF before cleaning.
◗
Do not use abrasive, scourers or liquids such
as alcohol, benzene, bleach or acetone to clean
the Groomer.
◗
Never clean, replace or remove Groomer
attachments with motor ON.
◗
Do not apply pressure to cutters.
◗
Do not touch cutters with hard objects as this
may damage them.
◗
Do not use while bathing, showering or
immerse the Groomer in water or other
liquids as damage to Groomer may occur.
During Use:
◗
If cut hairs have accumulated in the Guide
Comb area, remove hairs by shaking, blowing
or using cleaning brush provided. Remember
to adjust the trimming length back to your
selected setting when you replace the guide
comb on Groomer.
Once a Week:
1 Make sure the Groomer is switched OFF
and disconnected from the electrical outlet.
2 Remove any attachments.
3 Blow and/or shake out any hair that may
have accumulated in the attachment.
4 Clean the outside and inside of the
attachment with the brush supplied (fig. 27).
The cutter is fixed to the trimming
attachment(s) and cannot be removed.
5 Place the attachment back on Groomer or
place in the storage stand (fig. 28).
This Groomer has no other user-serviceable
parts. Any other service should be performed by
an Authorized Norelco Service Location.