Vector TCY-BH-U Manual

TCY-BH-U Intelligent humidistat
Features
• Low power energy consumption: < 1W per unit.
• Relays switching for outputs each up to 2(1.2)A.
• Humidity control for humidifying and de-humidifying.
• Option for fan supported devices.
• Cost saving option with Economy functionality and set point limitations.
• External sensor input for setpoint setback based on outdoor temperature.
• Control binary humidifiers and dehumidifiers with or without fan support.
• Temperature display of external input in Celsius or Fahrenheit.
• Password protected programmable user and control parameters:
Setpoint range limitation.
o
Access control for setpoints and mode change.
o
Access control for clock and time programs.
o
Select your display contents.
o
Selectable behavior after return from power failure.
o
Deluxe Version:
• Clock and time schedule functions
• Blue backlight for LCD
Applications
Humidifiers:
• On / Off type humidifiers
• On / Off type humidifiers with single speed fan support
Dehumidifiers:
• On / Off type dehumidifiers
• On / Off type dehumidifiers with single speed fan support
Combination humidifiers and dehumidifiers without fan support
General Description
The TCY-BH-U is a stand-alone electronic binary humidity stat. The TCY-BH-U features one internal humidity sensor, one
external NTC temperature sensor input and two binary outputs (Relays).
A detailed parameterization is possible with the use of a simple configuration routine. The TCY-BH-U can be configured using
the standard operation terminal. No special tools or software is required.
Ordering
Item Name Item code
TCY-BH-U
40-10 0055
TCY-BH-U-W04
40-10 0055-04
TCY-BH-U-W05
40-10 0055-05
TCY-BH-U-D
40-10 0056
TCY-BH-U-D-W04
40-10 0056-04
TCY-BH-U-D-W05
40-10 0056-05
Accessories
S-Tn10-2
40-20 0001
SD-Tn10-12-2
40-20 0002
SD-Tn10-20-2
40-20 0003
SDB-Tn10-12
40-20 0051
SDB-Tn10-20
40-20 0004
SOA-Tn10
40-20 0006
AES-HT-A5
40-50 0031-5
Doc:70-07-0102, V1.1, Date: 20100504
Subject to alteration
Variant Features
standard
Binary controller with:
humidifying
1 Internal humidity input
de-humidifying
1 external temperature input (For set point shift)
Deluxe
1 DO (Relay) for humidifier or dehumidifier
humidifying
1 DO (Relay) for fan (optional)
de-humidifying
Flying lead sensor with 2 m cable
Flying lead duct sensor 12cm immersion depth, 2m cable
Flying lead duct sensor 20cm immersion depth, 2m cable
Duct sensor with housing, 12cm immersion depth
Duct sensor with housing, 20cm immersion depth
Outdoor sensor
Replacement humidity sensor 5% accuracy
© Vector Controls GmbH, Switzerland
Humidistat TCY-BH-U
Page 1