Advertisement

Quick Links

TCY-BH Humidistat
Features
Control for binary humidifiers and dehumidifiers with
or without fan support.
Low power energy consumption: < 1W per unit
Relays switching for outputs each up to 300W
Cost saving option with Economy functionality and set
point limitations
External sensor input for setpoint setback based on
outdoor temperature
Password protected programmable user and control
parameters
Setpoint range limitation
o
Access control for setpoints and mode
o
change
Access control for clock and time programs
o
Select your display contents
o
Selectable behavior after return from power
o
failure
Temperature display of external input in Celsius or
Fahrenheit
Deluxe Version:
Clock and time schedule functions
Blue backlight for LCD
Applications
Humidifiers:
On / Off type humidifiers
o
On / Off type humidifiers with single speed fan support
o
Dehumidifiers:
On / Off type dehumidifiers
o
On / Off type dehumidifiers with single speed fan support
o
Combination humidifiers and dehumidifiers without fan support
General description
The TCY-BH is a stand-alone electronic binary humidity stat. The TCY-BH features one internal humidity sensor, one
external NTC temperature sensor input and two binary outputs (Relays).
A detailed parameterization is possible with the use of a simple configuration routine. The TCY-BH can be configured
using the standard operation terminal. No special tools or software is required.
Ordering
Item name
Item code
TCY-BH
40-10 0057
TCY-BH-W04
40-10 0057-04
TCY-BH-W05
40-10 0057-05
TCY-BH-D
40-10 0058
TCY-BH-D-W04
40-10 0058-04
TCY-BH-D-W05
40-10 0058-05
TCY-BH-230
40-10 0063
TCY-BH-230-W04
40-10 0063-04
TCY-BH-230-W05
40-10 0063-05
TCY-BH-D-230
40-10 0064
TCY-BH-D-230-W04
40-10 0064-04
TCY-BH-D-230-W05
40-10 0064-05
Accessories
SOD-Tn10-1
40-20 0108
AES3-HT-A5
40-50 0104
Doc: 70-00-0142, V1.4, 20160912
Subject to alteration
Variant
Features
standard
Binary controller with 24VAC power supply:
humidifying
1 Internal humidity input
de-humidifying
1 external temperature input (For set point shift)
Deluxe
1 DO (Relay) for humidifier or dehumidifier
humidifying
1 DO (Relay) for fan (optional)
de-humidifying
standard
Binary controller with 230VAC power supply:
humidifying
1 Internal humidity input
de-humidifying
1 external temperature input (For set point shift)
Deluxe
1 DO (Relay) for humidifier or dehumidifier
humidifying
1 DO (Relay) for fan (optional)
de-humidifying
Outdoor sensor
Replacement sensor 5% accuracy
© Vector Controls GmbH, Switzerland
www.vectorcontrols.com
Humidistat TCY-BH
Page 1

Advertisement

Table of Contents
loading

Summary of Contents for Vector TCY-BH

  • Page 1 NTC temperature sensor input and two binary outputs (Relays). A detailed parameterization is possible with the use of a simple configuration routine. The TCY-BH can be configured using the standard operation terminal. No special tools or software is required.
  • Page 2: Technical Specification

    Power case TCY-BH: ø 58 x 32 mm (ø 2.3” x 1.3”) Power case TCY-BH-230 60 x 50 x 32mm (2.4 x 2.0 x 1.3 in) Weight (including package) TCY-BH 260g (9.2 oz) TCY-BH-230 295g (10.4 oz) Selection of devices and sensors External temperature sensors: Use only our approved NTC sensors to achieve maximum accuracy.
  • Page 3: Dimensions Mm (Inch)

    (0.8) TCY-BH 32 (1.2) (0.8) TCY-BH-230 Enlarged back part for TCY-BH-230 Space required in flush mounting box: (H x W x D) 60 x 50 x 32mm (2.4 x 2.0 x 1.26 in.) Distance for mounting screws: Horizontal and vertical: 45 to 63mm (1.8 to 2.5 in.)
  • Page 4: Display And Operation

    The deluxe version includes a real time clock with a 48h backup battery powered through a super capacitor. The time does not need to be re-entered after a power failure. Error messages The TCY-BH may display the following error condition: Err1: Humidity sensor faulty. The humidity sensor is damaged or removed. Verify if sensing element! Err2: External input for temperature setback missing or damaged.
  • Page 5: Sensor Calibration

    Select the time of the first desired switching event for Pro1 (ON mode) to 08:00 with the UP/DOWN keys;  Press ENTER to conclude this switching event (first of 4 available). Doc: 70-00-0142, V1.4, 20160912 © Vector Controls GmbH, Switzerland Page 5 Subject to alteration www.vectorcontrols.com...
  • Page 6: Configuration Parameters

    Configuration parameters The TCY-BH is preset to work for most applications. For special requirements it can be fine-tuned to work ideally with a simple parameter setup routine. The parameters can be changed on the unit without the need of additional equipment.
  • Page 7: Output Configuration

    This will ensure that no left over humidity remains in the device or its ducts. Controls Output Fan Output Demand CP12 CP13 Time [s] Doc: 70-00-0142, V1.4, 20160912 © Vector Controls GmbH, Switzerland Page 7 Subject to alteration www.vectorcontrols.com...
  • Page 8: Input Configuration

    Control speed will slow down when a large number of samples are used for an averaging signal. This should be taken into account when defining the control parameters. Doc: 70-00-0142, V1.4, 20160912 © Vector Controls GmbH, Switzerland Page 8 Subject to alteration...

This manual is also suitable for:

Tdc-bh

Table of Contents